Care Home Rubbish is proud to be the exclusive distributor for the EV-3000i a revolutionary, compact domestic steam device.
Using only water, the device heats up to 170-degree c and 7 bar of pressure. The device also includes a number of interchangeable modular cleaning heads. This allows for environmentally cleaning to be taken place on all non-delicate items on board, areas perfect for the device include:
team cleaners with this feature have two water chambers:
That allows the operator to add water into the unit while it’s still running. EV 3000i unlimited autonomy steam cleaner is equipped with an electronic level sensor that refills the boiler when the level of the water inside is not enough. As a result, the unit avoids drops in pressure and temperature during the use.
When cleaning certain specific places, sometimes it is necessary to use water along with steam. Most dry steam cleaners take this water directly from the boiler because they do not have the technology to extract the water from the water tank.
This means that when the water from the boiler decreases, the temperature drops very quickly and then using steam becomes impossible after 40-50 seconds. In this case, you shall stop the operation, wait for a few minutes until the temperature in the boiler goes up again and reaches the necessary pressure.
The EV 3000i has an additional water pump for this function when the water ejection is needed.
The water is pumped from the non-pressurized tank and mixes with the steam. Thus, the steam quality, the pressure and the temperature remain unchanged even after 5-10 minutes of operation with this function.
Тhe operating pressure of the EV 3000i is 7 bars (101.6 Psi).
This means that the unit maintains this pressure without any fluctuation for two or three minutes of continuous* operation.
The pressure then decreases but is maintained between 4 bars (58 Psi) and 5 bars (72.5 Psi) as indicated in the graphic.
*Continuous operation – when constantly pressing on the steam trigger
EV 3000i ejects 110 g (3.9 oz) steam per minute comparing to others that have maximum 75 g (2.6 oz) steam per minute, even through they claim to have higher starting pressure. The EV 3000i has a very strong steam power, because of the capacity of its boiler.
Steam quality depends of the proper water / steam ratio in the boiler. The water probe is designed to provide the best steam quality.
Steam itself is formed by heating water above 100 °C (212 °F). While using it for cleaning, however, a distinction shall be made between the different types of steam and the respective amount of humidity that they contain.
• From 100 °C (212 °F) to 130 °C (266 °F) – gray steam or steam with high humidity content (up to 80%)
• From 130 °C (266 °F) to 150 °C (302 °F) – white steam or steam with a predominant humidity content (between 50% and 20%)
• From 150 °C (302 °F) to 170 °C (340 °F) – blue steam (or dry steam) with a minimum humidity content (≤ 5%).
92m M.Y – MY Lionheart